Cisco 7925G - Unified Wireless IP Phone VoIP - Page 7

Contents
vii
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Changing the Cisco Discovery Protocol Settings 5-7
Erasing the Configuration 5-8
Configuring Wireless Settings for the Network Profile 5-8
Accessing the WLAN Configuration Menu 5-8
Changing WLAN Configuration Settings 5-9
Changing Phone Settings 5-10
Configuring the Security Certificate on the Phone 5-12
Changing the USB Configuration 5-13
CHAPTER 6 Configuring the Phone Using the Wavelink Avalanche Server 6-1
Before You Begin 6-1
Best Practices 6-2
Assigning the Wavelink Server 6-2
Assigning the Wavelink Server from the Phone 6-2
Assigning the Wavelink Server using the Phone Web Page 6-3
Setting Up and Using the Phone CU 6-3
Assigning Attributes for the Phone 6-3
Defining Custom Names and Custom Values on the Phone 6-4
Defining Custom Parameters from the Phone Web Page 6-4
Installing the Cisco Unified Wireless IP Phone 7925G CU 6-4
Updating Configuration Files 6-5
Configuring Profile Settings 6-6
Configuring USB Settings 6-9
Configuring Trace Settings 6-9
Configuring Wavelink Settings 6-10
Updating the Phone 6-10
CHAPTER 7 Configuring Features, Templates, Services, and Users 7-1
Configuring Cisco Unified Wireless IP Phones in Cisco Unified Communications Manager 7-1
Telephony Features Available for the Phone 7-2
Specific Configuration Options for the Cisco Unified Wireless IP Phone 7925G 7-13
Configuring Softkey Templates 7-16
Softkey Templates for the Cisco Unified Wireless IP Phone 7925G 7-16
Changing Softkeys in a Template 7-16
Modifying Phone Button Templates 7-17
Setting Up Services 7-17
Configuring Corporate and Personal Directories 7-18