4-10
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Configuring Network Profiles
WLAN Security
Authentication Mode Assigns the authentication mode Configuring Advanced
Network Profile Settings,
page 4-25
Export Security
Credentials
Controls whether the wireless security
credential data can be exported in the
configuration file.
• True—Allows exporting the data
• False—Blocks exporting the data
Wireless Security Credentials
Username Assigns the network authentication username
for this profile
Configuring the Username
and Password, page 4-15
Password Assigns the network authentication password
for this profile
WPA Pre-shared Key Credentials
Pre-shared Key Type Determines the key type: Hex or ASCII Configuring the Pre-shared
Key, page 4-15
Pre-shared Key Identifies the key
Wireless Encryption
Key Type Determines the encryption key type: Hex or
ASCII
Setting Wireless
Encryption, page 4-16
Encryption Key 1-4 Identifies the Transmit Key:
• Encryption Key character string
• Key Size of 40 or 128 characters
Certificate Options
Client EAP-TLS
Certificate
Determines the certificate used for
authentication:
• Manufacturing issued
• User installed
Installing Authentication
Certificates for EAP-TLS
Authentication, page 4-17
Validate Server
Certificate
Enables the phone to use the server certificate.
Two options: true or false.
Note Applies to PEAP only.
Table 4-3 Basic Network Profile Settings (continued)
Item Description For More Information, See...
To Next Page
Loading...
