Cisco CATALYST 2960

Index
IN-41
Catalyst 2960 and 2960-S Switches Software Configuration Guide, Release 15.0(1)SE
OL-26520-01
See VMPS
VLAN membership
confirming
13-27
modes 13-3
VLAN Query Protocol
See VQP
VLANs
adding
13-8
adding to VLAN database 13-8
aging dynamic addresses 16-9
allowed on trunk 13-17
and spanning-tree instances 13-3, 13-6, 13-12
configuration guidelines, extended-range
VLANs
13-11
configuration guidelines, normal-range VLANs 13-6
configuring 13-1
configuring IDs 1006 to 4094 13-11
connecting through SVIs 12-11
creating 13-8
default configuration 13-7
deleting 13-9
described 12-2, 13-1
displaying 13-13
extended-range 13-1, 13-11
features 1-9
illustrated 13-2
in the switch stack 13-7
limiting source traffic with RSPAN 27-22
limiting source traffic with SPAN 27-16
modifying 13-8
multicast 21-17
native, configuring 13-19
normal-range 13-1, 13-4
number supported 1-9
parameters 13-5
port membership modes 13-3
static-access ports 13-10
STP and IEEE 802.1Q trunks 16-11
supported 13-2
Token Ring 13-6
traffic between 13-2
VTP modes 14-3
VLAN Trunking Protocol
See VTP
VLAN trunks
13-14
VMPS
administering
13-28
configuration example 13-29
configuration guidelines 13-25
default configuration 13-25
description 13-23
dynamic port membership
described
13-24
reconfirming 13-27
troubleshooting 13-29
entering server address 13-26
mapping MAC addresses to VLANs 13-23
monitoring 13-28
reconfirmation interval, changing 13-27
reconfirming membership 13-27
retry count, changing 13-28
voice aware 802.1x security
port-based authentication
configuring
10-39
described 10-31, 10-39
voice-over-IP 15-1
voice VLAN
Cisco 7960 phone, port connections
15-1
configuration guidelines 15-3
configuring IP phones for data traffic
override CoS of incoming frame
15-6
trust CoS priority of incoming frame 15-6
configuring ports for voice traffic in
802.1p priority tagged frames
15-5
802.1Q frames 15-5
connecting to an IP phone 15-4
default configuration 15-3
described 15-1