EasyManua.ls Logo

Cisco IP Phone 6851

Cisco IP Phone 6851
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAC Address using lower case hex digitsMA
Product NamePN
Product Series NumbePSN
Serial NumberSERIAL_NUMBER
The following table shows the list of macros supported on the phones:
Macro ExpansionMacro Name
The form $$ expands to a single $ character.$
Replaced by general purpose parameters GPP_A through GPP_P.A through P
Replaced by special purpose parameters GPP_SA through GPP_SD. These parameters
hold keys or passwords used in provisioning.
$SA through $SD are recognized as arguments to the optional resync URL
qualifier, --key.
Note
SA through SD
MAC address using lower case hex digits (000e08aabbcc).MA
MAC address using upper case hex digits (000E08AABBCC).MAU
MAC address using lower case hex digits with colon to separate hex digit pairs
(00:0e:08:aa:bb:cc).
MAC
Product Name; for example, IP Phone 6841.PN
Product Series Number; for example, 6841.PSN
Serial Number string; for example 88012BA01234.SN
SSL Client Certificate status, installed or not installed.CCERT
IP address of the phone within its local subnet; for example 192.168.1.100.IP
External IP of the phone, as seen on the internet; for example 66.43.16.52.EXTIP
Software version string; for example 2.0.6(b).SWVER
Hardware version string; for example 1.88.1.HWVER
Provisioning State (a numeric string):
-1 = explicit resync request
0 = power-up resync
1 = periodic resync
2 = resync failed, retry attempt
PRVST
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
98
XML Services

Table of Contents

Related product manuals