Cisco IP Phone 6851

Macro ExpansionMacro Name
Upgrade State (a numeric string):
•
1 = first upgrade attempt
•
2 = upgrade failed, retry attempt
UPGST
Result message (ERR) of previous upgrade attempt; for example http_get failed.UPGERR
Seconds since last resync attempt.PRVTMR
Seconds since last upgrade attempt.UPGTMR
Seconds since Line 1 lost registration with SIP server.REGTMR1
Seconds since Line 2 lost registration with SIP server.REGTMR2
Legacy macro name.UPGCOND
File access scheme (TFTP, HTTP, or HTTPS, obtained after parsing resync or upgrade
URL).
SCHEME
Deprecated alias for SCHEME, do not use.METH
Request target server host name.SERV
Request target server IP address (following DNS lookup).SERVIP
Request target UDP/TCP port.PORT
Request target file path.PATH
Result message of resync or upgrade attempt.ERR
The contents of the Line n UserID configuration parameter.UIDn
If unit is customized, value=1, otherwise 0.
Customization status viewable on Web UI Info
page.
Note
ISCUST
Name associated with first connected, ringing, or inbound call.INCOMINGNAME
Phone number of first connected, ringing, or inbound call. If there are multiple calls,
the data associated with the first call found will be provided.
REMOTENUMBER
The contents of the Line N Display Name configuration parameter.DISPLAYNAMEn
The contents of the Line N auth ID configuration parameter.AUTHIDn
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
99
XML Services