Cisco WAP2000 Administration Guide

Getting Started
Navigating the Web-Based Utility
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 16
5
• Firmware Upgrade—Upgrades the access point’s firmware on this
window.
• Reboot—Reboots the access point.
• Config Management—Backs up the configuration file for the access point,
as well as uploads the backup configuration file to the access point.
Status
This window allows you to view status information about your local network,
wireless networks, and network performance.
• Local Network—Displays system information, including software and
hardware version, MAC address, and IP address on the LAN side of the
access point.
• Wireless—Displays wireless network settings including SSID, network
mode, and wireless channel.
• System Performance—Displays the current traffic statistics of the access
point’s wireless and LAN ports.
About
Click the About link in the top right corner of the window to display the access
point’s software version.
Help
The access point’s software includes detailed Help files for all configuration tasks.
To view a Help page, click the Help link in the top right corner of the window. A
new window appears with information about the task that you are currently
viewing.

Cisco WAP2000 Specifications

General

Brand	Cisco
Model	WAP2000
Category	Wireless Access Point
Language	English