Cisco WAP2000 - Configuring Time Settings

Configuring the WAP2000 Access Point
Setting Up Your Access Point
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 21
6
Configuring Time Settings
The Setup > Time window displays the time settings of the access point. By
setting up the correct time, you can help your network administrator accurately
search the system log to identify problems.
You can set the time either manually or use the NTP option to automatically set the
time from a time server if the access point can access the Internet. NTP is the
default setting.
To configure the time settings for the access point, follow these steps:
STEP 1 Click Setup > Time.
STEP 2 To manually configure the time settings:
a. Click Manually.
b. In the Date field, enter the current date.
c. In the Time field, enter the current time.