Specifications
Security
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 79
C
Security
Quality of Service
Antenna Gain in dBi
3 dBi
Receiver
Sensitivity
11.g: 54Mbps@ -72dBm
11.b: 11Mbps@ -85dBM
WEP/WPA/WPA2
WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT,
WPA2-ENT
Access Control
Wireless Connection Control: MAC-Based
SSID Broadcast
SSID Broadcast Enable/Disable
802.1X
IEEE 802.1X support
Wireless Client
Isolation
Wireless Client devices can be isolated from each other
either within an SSID or between two SSIDs.
QoS
4 queues
WMM wireless priority
General
Wireless roaming based on IAPP
Auto-channel selection
To Next Page
Loading...
