Cisco WAP2000 Administration Guide

Configuring the WAP2000 Access Point
Configuring Administration Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 57
6
Restoring Factory Default Settings
The Administration > Factory Default window allows you to restore the access
point’s factory default settings.
!
CAUTION Restoring the factory default settings deletes all your custom settings. To preserve
your custom settings, save them to disk before restoring the factory default
settings, as described in “Managing the Access Point’s Configuration,” on
page 60.
To restore the factory default settings of the access point, follow these steps:
STEP 1 Click Administration > Factory Default.
STEP 2 Click Restore Factory Default.
Your access point reboots and comes back up with the factory default settings in
a few seconds.

Cisco WAP2000 Specifications

General

Brand	Cisco
Model	WAP2000
Category	Wireless Access Point
Language	English