Cisco WAP2000 Administration Guide

Configuring the WAP2000 Access Point
Using Windows Help Menus
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 66
6
Using Windows Help Menus
This wireless product requires Microsoft Windows. Product features can be
accessed through Windows Help and are described in the following sections:
• TCP/IP, page 66
• Shared Resources, page 66
• Network Neighborhood/My Network Places, page 66
TCP/IP
Before a computer can communicate with the Access Point, TCP/IP must be
enabled. TCP/IP is a set of instructions, or protocol, all computers follow to
communicate over a network. This is true for wireless networks as well. Your
computers will not be able to utilize wireless networking without having TCP/IP
enabled. Windows Help provides complete instructions on enabling TCP/IP.
Shared Resources
If you wish to share printers, folder, or files over your network, Windows Help
provides complete instructions about utilizing shared resources.
Network Neighborhood/My Network Places
Other computers on your network will appear under Network Neighborhood or
My Network Places, depending upon the version of Windows you're running.
Windows Help provides complete instructions about adding computers to your
network.

Cisco WAP2000 Specifications

General

Brand	Cisco
Model	WAP2000
Category	Wireless Access Point
Language	English