Cisco WAP2000 - Setting up Your Access Point; Configuring Basic Setup Settings

Configuring the WAP2000 Access Point
Setting Up Your Access Point
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 18
6
Setting Up Your Access Point
This section describes how to configure the general settings of the access point:
• Configuring Basic Setup Settings, page18
• Configuring Time Settings, page 21
Configuring Basic Setup Settings
The Setup > Basic Setup window displays the general settings of the access
point.
You can configure the following basic setup settings:
• Configuring Basic Setup Settings, page19
• Configuring Network Setup Settings, page 20