Cisco WAP2000 - Appendix C: Specifications; Specifications; Setup;Configuration

C
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 77
Specifications
This appendix lists the specifications of the Cisco WAP2000 Wireless-G Access
Point with Power Over Ethernet.
Specifications
Setup/Configuration
Model
WAP2000
Standards
IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
IEEE802.3af (Power Over Ethernet),802.1p (QoS priority),
802.1q (VLAN), 802.1X (Security Authentication), 802.11i
- Ready (Security WPA2), 802.11e - Ready (Wireless
QoS), 802.11F (Wireless Roaming)
Ports
10 Base-T/100 Base-TX Ethernet, 12 VDC Power
Buttons
Reset
Cabling Type
UTP CAT 5
LEDs
Power, POE, Wireless, Ethernet
Operating System
Linux
Web UI
Built-in web user interface (UI) for easy browser-based
configuration (HTTP/HTTPS)