Cisco WAP2000 Administration Guide

Configuring the WAP2000 Access Point
Configuring Wireless Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 41
6
Configuring Connection Control
The Wireless > Connection Control window displays the wireless connection
settings and allows you to configure the Connection Control List to either permit or
block specific wireless client devices connecting to (associating with) the access
point.
Disabling Wireless Connection Control
You can use the Wireless Connection Control window to disable wireless
connection control.
To disable wireless connection control for your access point, follow these steps:
STEP 1 Click Wireless > Connection Control.
STEP 2 From the Select SSID drop-down menu, select the SSID of the wireless network
that you want to disable.
STEP 3 In the connection control section, click Disabled (default).

Cisco WAP2000 Specifications

General

Brand	Cisco
Model	WAP2000
Category	Wireless Access Point
Language	English