Cisco WAP2000 - Rebooting the Access Point

Configuring the WAP2000 Access Point
Configuring Administration Settings
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide 59
6
e. Click Upgrade and follow the on-screen instructions.
STEP 2 Restore your custom settings as described in “Managing the Access Point’s
Configuration,” on page 60.
Rebooting the Access Point
The Administration > Reboot window allows you to reboot the access point.
To reboot the access point, follow these steps:
STEP 1 Click Administration > Reboot.
This feature is useful when you need to remotely reboot the access point.
STEP 2 Click Reboot.