Cisco WAP2000 Administration Guide

Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide iv
Contents
Help 16
Chapter 6: Configuring the WAP2000 Access Point 17
Setting Up Your Access Point 18
Configuring Basic Setup Settings 18
Configuring Basic Setup Settings 19
Configuring Network Setup Settings 20
Configuring Time Settings 21
Configuring Wireless Settings 22
Configuring Basic Settings 23
Configuring Security 25
Configuring WPA-Personal 27
Configuring WPA2-Personal 28
Configuring WPA2-Personal Mixed 29
Configuring WPA-Enterprise 31
Configuring WPA2-Enterprise 33
Configuring WPA2-Enterprise Mixed 35
Configuring RADIUS 37
Configuring WEP 39
Configuring Connection Control 41
Disabling Wireless Connection Control 41
Allowing Specified MAC Addresses to Connect to the Wireless Network 42
Preventing MAC Addresses from Connecting to the Wireless Network 42
Configuring Advanced Settings 43
Configuring VLAN & QoS 46
Configuring the Access Point’s Modes of Operation 48
Configuring Administration Settings 51
Configuring Management Settings 52
Configuring the Administration Log 55
Restoring Factory Default Settings 57
Upgrading the Firmware 58
Rebooting the Access Point 59
Managing the Access Point’s Configuration 60
Verifying Access Point Status 61
Checking Local Network Status 61

Cisco WAP2000 Specifications

General

Brand	Cisco
Model	WAP2000
Category	Wireless Access Point
Language	English