Chapter 2 Operating Principles
2-1. Operation of Each Mechanism
2-11 CL-S400DT
When thin media is used (thin thermal paper, label paper, etc.):
When thin media is used, the optimum position of the thermal element is nearly right above the
center of the “SA2 Platen”. The printer is designed so that the thermal element is set to that
position when the Media thickness adjustment dial is set to “1”.
* Factory default: The Media thickness adjustment dial is set to “1”.
[Thin media
toward dial No. 0
]
Cam Adjust Head Angle
SA Plate Holder Head
SA2 Platen
SA2 Head
A
B
Thermal element
Supporting point
Media
(Media thickness adjustment dial)
To Next Page
Loading...
