Citizen CL-S400DT - Chapter 3: Printer Adjustments; Sensor Adjustment Procedures

Chapter 2 Operating Principles
2-3. Operation Panel
CL-S400DT 2-32
(3) Menu list print mode
You can print the list of machine information and current menu settings.
1. While pressing and holding the [MENU] key, turn on the power.
2. When the POWER LED (green) lights and the LCD indicates “Print Settings”, release the
[MENU] key. The printer prints the menu list in continuous mode and the list of machine
information and current menu settings are printed. Then the printer enters menu setup
mode for further menu operation.
To exit from menu list print mode: In Main menu, press the [PAUSE] (W) key.
Machine Information
Model Number : CL-S400DT
Boot Version : ****
ROM Version : ********
ROM Date (DD//MM//YY) : **/**/**
ROM Check Sum : ****
FPGA Version : ****.****
Head Check : OK
Print Counter : 0000.082km
Service Counter : 0000.082km
Cut Counter : 0
Sensor Monitor : 1.50V
Option Interface : None
Current Menu Setting
[Global Config Menu]
Confug set : 1
[Page Setup Menu]
Print Speed : 6 IPS
Print Darkness : 10
Darkness Adjust : 00
Continuous Media Length : 4.00 inch
Vertical Position : 0.00 inch
Horizontal Position : 0.00 inch
Vertical Image Shift : 0.00 inch
Auto Side Shift : 0 dot
Media Sensor : See Through
Small Media Adjustment : Off
Small Media Length : 1.00 inch
Symbol Set : PM
[System Setup Menu]
Sensor Level : 1.7 V
Paper End Level : 2.80 V
Error Reporting : On Printing
Buzzer Select : On
Metric/Inch : Inch
Max Media Length : 10.00 inch
Setting Lock : Off
Keyboard Lock : Off
Standby Mode : Off
Standby Timer : 5 min
Control Code : STD
Emulation Select : DM4
Emulation Auto Detect : On
Note:
Citizen continually enhances its
printers with new options and
settings based on our customer’s
requests. Extra or changed menu
items may appear on the print out
in some cases.