Chapter 3 Disassembly and Maintenance
3-4 Maintenance Tools List
3-5 CL-S400DT
3-4. Maintenance Tools List
Maintenance tools shown below are needed when replacing the maintenance parts such as the
“SA Main PCB”, “Unit, Motor”, etc.
Maintenance Tools List
No. Name Q'ty Description
1 Phillips Screwdriver 1 Bit: #0, #1, #2
2 Flat-blade Screwdriver 1 4.3 mm width
3 Box wrench 1 Box size: 5 mm
4 Tweezers 1
5 Round Nose Pliers 1
6 Cutting Nippers 1
7 Volt-ohm Meter 1
8 Scale 1 For installing the “Holder Paper 127”
To Next Page
Loading...
