Chapter 3 Disassembly and Maintenance
3-6 Disassembly, Reassembly and Lubrication
3-19 CL-S400DT
4. Apply grease to the following place.
Along the groove (for sliding) of the “Guide Paper L”: HANARL UD-24
5. After assembling the “SA Guide Paper L”, stick the “Sheet Adjust Sensor L Scale”.
First, slide the “Holder Sensor Adjust L” in the direction of the arrow until it stops. Next, position
the “Sheet Adjust Sensor L Scale” so that its scale marking “0” is aligned with the arrow head
of the “Holder Sensor Adjust L”, and then stick it.
(HANARL UD-24)
Holder Sensor Adjust L
Sheet Adjust Sensor L Scale
To Next Page
Loading...
