- 8 -
Commands for Non-volatile Memory
Command Function MODE GS P
GS ( C Editing user NV memory S
GS ( L
GS 8 L
Specifying graphics data S
GS g 0 Initializing maintenance counter S
GS g 2 Sending maintenance counter S
FS p Printing the download NV bit images S
FS q Defining the download NV bit image S
Black Mark Control Commands
Command Function MODE GS P
GS FF Printing and ejecting Black mark paper S.P.
GS < Initializing the printer mechanism S.P.
GS A Correcting the leader position of Black mark paper S.P.
GS C 0 Setting the numbering print mode S.P.
GS C 1 Setting the numbering counter mode (A) S.P.
GS C 2 Setting the numbering counter S.P.
GS C ; Setting the numbering counter mode (B) S.P.
GS c Print the counter S.P.
GS l Setting the Black mark length S.P.
Printer Function Setting Commands
Command Function MODE GS P
GS ( D Enabling or disabling real-time command S
GS ( E Printer function setting command S
GS ( K Selecting print control method S
GS ( M Customizing the printer S
GS ( N Designating font attribute S
Other Commands
Command Function MODE GS P
DLE ENQ Real-time request to printer S.P.
DLE DC4 Outputting specified pulse in real-time S.P.
ESC = Data input control S.P.
ESC @ Initializing the printer S.P.
ESC L Selecting PAGE MODE S
ESC S Selecting STANDARD MODE P
ESC p Generating the specified pulses S.P.
ESC RS Sound buzzer S.P.
GS ( A Execution of test printing S
GS I Sending the printer ID S.P.
GS P Specifying the basic calculation pitch S.P.
In the Mode column: S = STANDARD MODE, P = PAGE MODE
O = shows the command affected by GS P.
To Next Page
Loading...
