Citizen CT-S2000 Command Reference

- 64 -
2.2.7 Paper Detecting Commands
ESC c 3 n 
[Function] Selecting the Paper Sensor valid for a Paper-end signal output
[Code] <1B>H<63>H<33>H<n>
[Range] 0≤n≤255
[Outline] This command selects by which Paper Sensor a Paper-end signal should be output.
Each bit for “n” has the following meaning:
Value
Bit Position
0 1
0 Paper Near-end Disabled Enabled
1 Paper Near-end Disabled Enabled
2 Paper-end Disabled Enabled
3 Paper-end Disabled Enabled
4 Undefined — —
5 Undefined — —
6 Undefined — —
7 Undefined — —
[Caution] This command is valid only for the parallel interface.
[Default] n = 15

Citizen CT-S2000 Specifications

General

Maximum resolution	203 x 203 DPI
Autocutter	Yes
Autocutter durability	2 million cuts
Maximum roll diameter	102 mm
Supported paper width	58, 60, 80, 82.5 mm
Standard interfaces	Ethernet
Connectivity technology	Wired
Dimensions (WxDxH)	147 x 207 x 147 mm
Certification	UL, C-UL, FCC A, TUV-GS, C
Internal memory	0.375 MB
Built-in barcodes	Code 39, Code 93
Mean cycles between failures (MCBF)	200000000
Compatible operating systems	Windows 2000 / XP / VISTA / 2003 Server, OPOS1.8, CUPS
Product color	Black
Power requirements	100 - 240 V, 50/60 Hz, 150 VA
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	2000 g