Citizen CT-S2000 - GS ( K Pl Ph Fn M (Selecting Print Control Method); Fn = 48: Function 48 Setting Print Control Mode

- 130 -
GS ( K pL pH fn m 
[Function] Selecting print control method
[Outline] Executes the setting related to the print control specified by the value of “fn”.
Function No. (fn) Function
48
Sets print control mode.
49 Sets printing density.
50 Sets printing speed.
fn = 48: Function 48 Setting Print Control Mode
GS ( K pL pH fn m 
[Code] <1d>H<28>H<4B>H<pL><pH><fn><m>
[Range] (pL + pH × 256) = 2 (pL = 2, pH = 0)
fn = 48
0≤ m ≤4
48≤ m ≤52
[Outline] Sets print control mode.
m Print Control Mode
0, 48 Selects the print control mode at power on.
1, 49 Sets print control mode 1 (standard)
2, 50 Sets print control mode 2 (fence bar code)
3, 51 Sets print control mode 3 (ladder bar code)
4, 52 Sets print control mode 4 (2-dimensional bar code)
[Default] m = 1