Citizen CT-S2000 - ESC = N (CBM1000 Non-Compatible Mode) (Data Input Control)

- 141 -
ESC = n (CBM1000 non-compatible mode) 
[Function] Data input control
[Code] <1B>H<3D>H<n>
[Range] 1≤n≤3
[Outline] • Selecting equipment for which data input from the host is valid.
• Each bit of “n” indicates as follows.
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
n Function
1 Specifies printer only.
2 Specifies customer display only.
3 Specifies printer and customer display
[Caution] • Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
[See Also] n = 1