Citizen CT-S2000 - GS ( M Pl Ph Fn M (Customizing the Printer)

- 133 -
GS ( M pL pH fn m 
[Function] Customizing the printer
[Outline] Executes processing related to escape/recovery of the value set in the work area or
the data defined by various kinds of command.
fn Function
1, 49 Copies the set value stored in work area to the storage area.
2, 50 Copies the set value stored in storage area to the work area.
3, 51
Specifies the auto loading function of the set value at initialization to
be valid or invalid.
• Work area:
Area where data is initialized by power OFF of resetting (initialize). Operation is made
in accordance with the data set in this area.
• Storage area:
Area where data is not initialized by power OFF or resetting (initialize).
Commands for this function
Command Type Command
Status relations ESC c3, GS a
Macro registration GS :
Character type ESC M, ESC R, ESC t
Font attribute
ESC !, ESC –, ESC E, ESC G, ESC V, ESC {, GS !,
GS B, GS b, GS (N
Line feed amount, character space ESC SP, ESC 2, ESC 3
Barcode GS H, GS f, GS h, GS w
2-dimensional code GS ( k <fn65~70>
Print position ESC D, ESC T, ESC a, GS L, GS W
Kanji control relations FS !, FS &, FS (A, FS –n, FS (n, FS S, FS W
Other ESC c4, ESC c5, GS (D, GS P