Citizen CT-S2000 - Fn = 1: Function 1 Transferring to Printer Function Setting Mode; Fn = 2: Function 2 End of Printer Function Setting Mode

- 111 -
fn = 1: Function 1 Transferring to Printer Function Setting Mode
GS ( E pL pH fn d1 d2
[Code] <1d>H<28>H<45>H pL pH fn d1 d2
[Range] (pL + pH 256) = 3 (pL = 3, pH = 0)󳭣
fn = 1
d1 = 73 (“I”)
d2 = 78 (“N”)
[Outline] Transfers to printer function setting mode and sends the report of mode transfer.
Hex. No. of Data
Header 37H 1
ID 20H 1
NULL 00H 1
fn = 2: Function 2 End of Printer Function Setting Mode
GS (E pL pH fn d1 d2 d3
[Code] <1d>H<28>H<45>H pL pH fn d1 d2 d3
[Range] (pL + pH x256) = 4 (pL = 4, pH = 0)
fn = 2
d1 = 79 (“O”)
d2 = 85 (“U”)
d3 = 84 (“T”)
[Outline] • Terminates printer function setting mode and executes resetting.
• Clears input buffer and print buffer and restores various kinds of setting to the state
at power on.
• Operates only in printer function setting mode.