Citizen CT-S2000 - Line Feed Span Commands; ESC 2 (Specifying 1;6-Inch Line Feed Rate)

- 45 -
2.2.4 Line Feed Span Commands
ESC 2 
[Function] Specifying 1/6-inch line feed rate
[Code] <1B>H<32>H
[Outline] (1) When memory switch 5-2 is OFF:
The line feed rate per line is specified by 1/6 inch.
(2) When memory switch 5-2 is ON:
The line feed rate per line is specified by 30/203 inch.
[Caution] Line feed rate can be specified respectively for both STANDARD MODE and PAGE
MODE.
[Sample Program]
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"3"; CHR$(0);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"3"; CHR$(50);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT CHR$(&H1B);"2";
LPRINT "AAAAA"; CHR$(&HA);
LPRINT "AAAAA";
LPRINT CHR$(&H1B);"J"; CHR$(100);
LPRINT "AAAAA"; CHR$(&HA);
LPRINT "AAAAA"; CHR$(&HA);
[Print Results]
A A A A A
1/6-inch line feed
A A A A A 0/360-inch line feed
A A A A A
50/360-inch line feed
A A A A A
1/6-inch line feed
A A A A A
100 /360-inch line feed
A A A A A
1/6-inch line feed
A A A A A