Citizen CT-S2000 - Msw5

- 184 -
• MSW4-3󳊛 Paper heading cut
[Outline] When cover is closed, feed paper about 13mm before cut.
OFF (0) ON (1)
Feed & Cut at TOF Invalid Valid
ON (1) OPERATION: Paper heading cut is enabled.
OFF (0) OPERATION: Paper heading cut is disabled.
[Default] ON (1) [Valid]
• MSW4-4󳊛 Reserved [Fixed to OFF (0)]
• MSW4-5󳊛 Reserved [Fixed to OFF (0)]
• MSW4-6󳊛 Reserved [Fixed to OFF (0)]
• MSW4-7󳊛 Reserved [Fixed to OFF (0)]
• MSW4-8󳊛 Forcible partial cut
[Outline] Select the operation taken when full cut command is received.
OFF (0) ON (1)
Partial only Invalid Valid
ON (1) OPERATION: When full cut command is received, partial cut, not full cut, is taken.
OFF (0) OPERATION: When full cut command is received, full cut is taken.
[Default] ON (1) [Valid]
MSW5
• MSW5-1󳊛 Buzzer
[Outline] Select the enable/disable of buzzer.
OFF (0) ON (1)
Buzzer Valid Invalid
ON (1) OPERATION: Disable buzzer
When an error occurs or memory switch setting is changed manually, no buzzer
sounds.
OFF (0) OPERATION: Enable buzzer.
When an error occurs or memory switch setting is changed manually, the buzzer
sounds.
[Default] OFF (0) [Valid]