- 9 -
2.1.1 Description of Items
XXXX
[Function] The name of a command.
[Code] The string of codes comprising the command is represented by < >H for hexadecimal
numbers, < >B for binary numbers, and < > for decimal numbers, [ ] k denotes the
number of repetition of “k” times.
[Range] Indicates the values (setting range) of arguments of the command.
Note: If values outside the defined domain specified with control codes are used,
malfunctions could possibly occur, so be sure to use the values within the
defined domain.
[Outline] Describes the functions of the command.
[Caution] Describes important points and cautionary notes, as required.
[Default] Initial values for the command if it has arguments.
[See Also] Describes commands related to the command when it is used.
[Sample Program] Describes examples of coding on Quick-Basic.
* Examples are only for reference. They may vary depending on language and version.
For details, please refer to a manual in your language.
[Print Results] Describes the print results obtained by executing the above programs. However, the
print results shown are different in scale from actual print results
To Next Page
Loading...
