Citizen CT-S2000 - Cutter Commands; ESC I (Full Cut)

- 69 -
2.2.10 Cutter Commands
ESC i 
[Function] Full cutting of paper
[Code] <1B>H<69>H
[Outline] Executes full cutting of paper.
[Caution] • This command only works it is entered at the beginning of a line.
• Before cutting paper, feed the paper more than the cutting position of paper from
the print position. Without this paper feeding, the character just after printing
remains before the cutter.
[Sample Program]
LPRINT “AAAAA”;
LPRINT CHR$(&H1B);"J";
LPRINT CHR$(150);
LPRINT CHR$(&H1B);"i";
[Print Results]
AAAAA
Cut position
AAAAA
Paper feed
direction
Cut state