Citizen CT-S2000 - 4.5 Hexadecimal Dump Printing; 4.6 Error Indication

- 24 -
ESC M n 
[Function] Selection of character fonts
[Code] <1B>H<4D>H<n>
[Range] 0≤n≤2
48≤n≤50
[Outline] Selects character fonts.
n
Function
0, 48
Selection of font A (12 x 24)
1, 49
Selection of font B (9 x 24)
2, 50
Selection of font C (8 x 16)
[Caution] • ESC ! can also select fonts, but the setting made by the command that has last been
processed becomes valid.
[Default] n = 0
[See Also] ESC !
ESC R n 
[Function] Selecting the international character set
[Code] <1B>H<52>H<n>
[Range] 0≤n≤15
[Outline] Depending on the value of “n”, one of the following character sets is specified;
n Character Set n Character Set
0 U.S.A. 8 Japan
1 France 9 Norway
2 Germany 10 Denmark II
3 U.K. 11 Spain II
4 Denmark I 12 Latin America
5 Sweden 13 Korea
6 Italy 14 Croatia
7 Spain I 15 China
[Default] n = 0 (Overseas), n = 8 (Domestic)
[See Also] 3.2 “International Character Code Table”