Citizen CT-S2000 - Fn = 7: Function 7 Copying User-Defined Page

- 122 -
fn = 7: Function 7 Copying User-defined Page
GS ( E pL pH fn a d1 d2 
[Code] <1d>H<28>H<45>H pL pH fn a d1 d2
[Range] (pL + pH x256) = 4 : (pL = 4, pH = 0)
fn = 7
a = 0, 1, 2, 48, 49, 50
[Outline] • Copies the data of user-defined code page in the font specified by “a”.
a Font Type
0, 48 Font A: 12 (horizontal) x24 (vertical)
1, 49 Font B: 9 (horizontal) x24 (vertical)
2, 50 Font C: 8 (horizontal) x16 (vertical)
• Configuration of customized value No.
d1 d2 Function
31 30
Loads the character code page data specified by “a” in storage area
to work area.
30 31
Saves the character code page data in work area to the storage
area of the font specified by “a”.
• Work area: Area where data is initialized by power OFF or resetting (initialize).
Operation is made in accordance with the data set in this area.
• Storage area: Area where data is not initialized by power OFF or resetting (initialize).
• User-defined code page: Page 255 (ESC t 255)
• This function operates only in printer function setting mode.