Citizen CT-S2000 - Page 116

- 114 -
• Setting memory switch 4 (a = 4)
n b (Set Value) Function
48 (Default)
At the selection of Black mark paper, disables auto
end-measurement.
1
49
At the selection of Black mark paper, enables auto
end-measurement.
2 48 (Default) Reserve
48
Paper heading cut disabled.
3
49 (Default)
Paper heading cut enabled.
4 48 (Default) Undefined
5 48 (Default) Undefined
6 48 (Default) Undefined
7 48 (Default) Undefined
48
Forcible partial cut disabled.
8
49 (Default)
Forcible partial cut enabled (full but by command: enabled).
* Memory switches 4-1, -2 are valid only at Black mark model.
• Setting memory switch 5 (a = 5)
n B (Set Value) Function
48 (Default) Buzzer sound enabled 1
49 Buzzer sound disabled
48 (Default) Basic calculation pitch (180 dpi / 360 dpi) 2
49 Basic calculation pitch (203 dpi / 406 dpi)
48 USB mode virtual serial 3
49 (Default) USB mode printer class
4 48 (Default) Reserve
5 48 (Default) Undefined
6 48 (Default) Undefined
7 48 (Default) Undefined
8 48 (Default) Undefined