- 118 -
• a = 201: Outputs ACK to the position specified by (nL + nH x256).
(nL + nH x256) ACK Output Position
1 (Default) ACK-in-Busy
2 ACK-while-Busy
3 ACK-after-Busy
• a = 202: Controls input buffer full Busy with the value selected by (nL + nH x256)
and controls Busy with output/cancel timing (remaining capacity).
When Input Buffer
Capacity “Small” is Set
When Input Buffer Capacity
4K Bytes (Large) is Set
(nL+nH x256)
Output Cancel Output Cancel
1 16 26 128 256
2 16 40 128 512
3 30 50 72 256
4 30 60 72 512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• This function operates only in printer function setting mode.
• The value changed by this command is enabled by the following.
• Execution of function 2 (fn = 2: End of printer function setting mode)
(Recommended)
• Reentering power supply.
• Hardware resetting by reset terminal
To Next Page
Loading...
