- 43 -
(2) If a sufficient area cannot be provided as a result of step (1), the print area is
extended toward the left (so, the left margin is decreased).
Printable area
(1) Extended
Left margin toward the right
(2) The left margin is trimmed Print area width
(3) If a sufficient area cannot be provided as a result of step (2), the right spacing is
trimmed.
• When mapping a bit image (or downloaded bit image), if the print area is
narrower than the minimum width of the bit image (two dots for single density,
or one dot for double density), only the line for that image is handled as
follows:
(1) The print area is extended toward the left (so, the left margin is decreased)
until it is equal to the minimum width of the image, but not wider than the
printable area.
[Default] When paper width is 80 mm: nL = 64, nH = 2
When paper width is 58 mm: nL = 128, nH = 1
[See Also] GS L, GS P
A
To Next Page
Loading...
