Electric System QUANTUM TIC
12-6 10/04
1.3 3500 S – circuit diagram
1 Raise / lower pick-up solenoid valve
2 Articulated drawbar solenoid valve
3 Knife frame solenoid valve
4 K-type dry crop top solenoid valve
5 Tailgate solenoid valve
6 Proportional solenoid valve, S-type floor conveyor
7 Control box
(operating panel, 10K potentiometer is active on S wagon only)
8 Main plug connector, 16 pins, plug/outlet
9 Set of cables, enclosed, fused socket outlet
10 Plug, 2-pin
11 “Wagon full” alarm switch
12 Knife frame reed contact
13 Oil pressure switch (raise knife frame)
14 Chopper amplifier (prop.) for floor conveyor, only for 3500S
23 Pick-up drive and rotor On/Off solenoid valve, only for 3500 S
To Next Page
Loading...
