Electric System QUANTUM TIC
12-12 10/04
2.0 QUANTUM 4500 S / 5500 S / S-16 / S-18 / 6800 S
2.1 Circuit Diagram
2.1.0 up to serial no.:
H Hydraulic valves, see also hydraulic circuit diagram
X4-1 2 Pick-up drive On solenoid
X4-2 Pick-up drive Off solenoid
X4-3 Lower pick-up solenoid
X4-4 Raise pick-up solenoid
X4-5 Open knife frame solenoid
X4-6 Close knife frame solenoid
X4-7 Open tailgate solenoid
X4-8 Close tailgate solenoid
X4-9 Tailgate pressureless solenoid
X4-10 Raise articulated drawbar solenoid
X4-11 Lower articulated drawbar solenoid
X4-12 Reverse floor conveyor solenoid
X5-13 Floor conveyor fast 2-speed motor solenoid (option)
X5-14 Master valve solenoid
X5-15 Shredder drum drive On solenoid
X5-16 Shredder drum drive Off solenoid
X5-17 Left cross conveyor belt solenoid
X5-18 Right cross conveyor belt solenoid
X5-19 Tailgate pressure solenoid
X5-25 Floor conveyor forward solenoid
E Electric switches
X6-1 2 height alarm centre On reed switches (up to serial no.)
X6-2 2 height alarm top On reed switches
X6-3 2 height alarm centre Off reed switches (up to serial no.)
X6-4 Wagon full reed switch
X6-5 Knife frame reed switch
X6-6 Lock tailgate reed switch
X6-7 Cross conveyor belt reed switch (option)
X6-8 130 bar oil pressure switch, tailgate
X6-9 2 bar oil pressure switch
X7-12 Shredder drum speed sensor
X8-13 3 height alarm top Off reed switches
X8-14 Knife frame open switch
X8-15 Knife frame closed switch
A Central terminal compartment
B Switch console
C Tractor power supply
XA Plug connector on wagon
XB Plug connector on wagon
XC Plug connector on wagon
XD Plug connector on wagon
XE Plug connector on wagon
To Next Page
Loading...
Need help?
General
