Group 29, Hydraulic Sump, Filters, and Pump
29-1-6 • Main Hydraulic Sump, Filters, and Pump Specifications and Description SM 765, Nov ’06
Also, check that the hydraulic line connections at the filter
head are tightened correctly.
Refill the sump tank with Clark MS-68 Hydraulic Fluid.
Check truck operation. Turn key switch ON. Operate the
hydraulic system. Cycle the lift system serval times: raise
the lift carriage to full height and lower fully down. Check
for leaks. Recheck sump tank fluid level.
CAUTION
!
Be sure there is adequate overhead clearance
before raising upright.
Turn the key switch OFF.
Filter
Filter Head
To Next Page
Loading...
