EasyManua.ls Logo

Clark GEX20 - Page 402

Clark GEX20
410 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Group 40, Specifications
40-1-4 • Nameplate and Decals SM 765, Nov ’06
Warning Decal
The Operator Safety Warning Decal describes basic safe
operating procedures that should be used when operating
the truck. This decal depicts important points about truck
operation and warns operators about truck safety hazards.
This decal is meant as a reminder for operators. It is
placed where operators can review the points daily as they
conduct a visual inspection and prepare the truck for
work.
IMP
O
RTANT
Safety and warning decals are placed in con-
spicuous locations on the truck to remind
operators of essential procedures or to pre-
vent them from making an error that could
damage the truck or cause personal injury.
Safety and warning decals should be replaced
immediately if missing, damaged or illegible.
This is required by OSHA.
Lift trucks can be tipped over if operated improperly.
Experience with lift truck accidents has shown that the
driver cannot react quickly enough to jump clear of the
truck and overhead guard as the truck tips. To protect
operators from severe injury or death in the event of a tip-
over, make sure this decal is in place to remind them to
always use their seat belts.
Operator Safety Decar
The Operator Safety Decal depicts
impotant points about truck operation
and warns operators about truck safety
hazards. The Operator Safety Decal is
meant as a reminder for operators and is
placed where operators can review the
points daily as they conduct a visual
inspection and prepare the truck for
work.
P
Read and understand operator's
manual.
Not operate a faulty lift truck.
Have the overhead guard and load backrest
extension in place.
BEFORE OPERATING lift truck, operator must:
Not repair lift truck unless trained and authorized.
Be trained and authorized.
Keep entire body inside truck cab.
Never carry passengers or lift people.
Travel with lift mechanism as low as possible.
and tilted back.
DURING OPERATION, lift truck operator must:
Keep truck away from people and obstructions.
Wear a seat belt.
Clark Material Handling Co. Sit Down Rider 2798233
Shift into neutral.
Turn off key.
TO PARK lift truck, operator must:
Set parking brake.
Completely lower forks or attachments.
WARNING
P
P
Read and understand operator's
manual.
Not operate a faulty lift truck.
Have the overhead guard and load backrest
extension in place.
BEFORE OPERATING lift truck, operator must:
Not repair lift truck unless trained and authorized.
Be trained and authorized.
Keep entire body inside truck cab.
Never carry passengers or lift people.
Travel with lift mechanism as low as possible.
and tilted back.
DURING OPERATION, lift truck operator must:
Keep truck away from people and obstructions.
Wear a seat belt.
Clark Material Handling Co. Sit Down Rider 2798233
Shift into neutral.
Turn off key.
TO PARK lift truck, operator must:
Set parking brake.
Completely lower forks or attachments.
WARNING
P
Most lift truck
INJURIES
are to other
people near
the lift truck.
Watch Out
For Other
People
Prevent
Overturns!
AVOID :
Don't
jump
Lean
away
In Case of
Tip-Over:
2798235
WARNING
Buckle up!
Read the
manual
loads over
capacity on
nameplate
fast or
sharp turns
poorly
maintained
lift truck
low tire
pressure
unstable or
high loads
slippery,
sloping,
or uneven
surfaces
Hold on
tight
Brace feet
Apply brake
when leaving
truck

Table of Contents

Related product manuals