User Guide| FreeSpeak II for Eclipse HX
Key to display layout
Feature Description
Label for key A assignment.
Label for key B assignment.
Label for Key C Assignment or CALL key for Key A if not assigned.
Label for Key D Assignment or CALL key for Key B if not assigned.
Volume level for Key A assignment.
Volume level for Key B assignment.
Signal strength.
Role name for the role assigned to the Beltpack.
Battery life remaining (in hours for Li-Ion, in % for AA battery).
A 4-pin male headset connector is provided for connection with a standard Clear-Com headset or
similar device. The FS II beltpack will operate for approximately 18 hours using a rechargeable Li-
Ion battery. Real operational times depend on usage and quality of batteries used. You can also
use AA batteries, but you must not attempt to recharge them.
On the bottom of the beltpack, there is an LED torch with a latching key that provides a quick and
convenient source of illumination when working in poorly lit areas.
Page 23
To Next Page
Loading...
Need help?
General
