User Guide| FreeSpeak II for Eclipse HX
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Listen Again Opt > Recording Time.
3. Use either rotary control to select a value between Off and 15 seconds.
To determine how long the message is stored:
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Listen Again Opt > Auto Delete
Time.
3. Use either rotary control to select a value between Off and 240 minutes.
5.10 Control audio on keys C & D (beltpack)(advanced menu option
only)
Pressing the menu button on your beltpack can trigger Listen Again. However, a quick tap on the
menu button can also be configured to allow volume on keys C & D to be adjusted by the rotary
controllers.
The default setting for this option is Listen Again.
To control volume on keys C & D using menu keytap:
1. Press and hold the menu button to enter menu mode.
2. Navigate to Settings/Menu key oper using the rotary controllers
3. Press key D to select menu key operation option
4. Scroll down to Switch to Vol Ctrl using rotary controllers
5. Press key D to select option.
You can now control audio volume on keys C & D using the rotary controllers (the same as you do
on keys A & B) by giving the menu key on the beltpack a quick tap, instead of using this action to
trigger Listen Again. This menu key behavior option can also be set in the EHX software.
Note: This mode has a 5 second inactive time-out, after which time the rotary controllers will revert to
controlling volume on keys A & B. To re-activate this mode in order to adjust C & D, use another
quick tap of the menu key. To switch quickly between A & B and C & D, tap the menu key to toggle.
5.11 Accessing beltpack information
You can access a list of beltpack information, including battery and fault-finding information.
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Information.
Page 45
To Next Page
Loading...
Need help?
General
