User Guide| FreeSpeak II for Eclipse HX
5.6 Configuring the beltpack alarm options
You can configure the following alarm options:
l Low battery alarm
l Low battery alarm threshold
l Out of range alarm
l Call alert mode
Note: See 4.2.3 Beltpack headset tones/alerts for a description of tones and alerts.
5.6.1 Setting the low battery alarm
Use this setting to determine how the beltpack behaves when battery power is low. You can set
the following types of alarm:
l Audio warning
l Vibrate
l Audio warning and vibrate
l Off
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Alarm Options > Alarm Mode.
n Use either rotary control to select between:
n Vibrate & Audio (default)
n Vibrate Only
n Audio Only
n Off
3. To confirm the selection and exit the menu screen, press the Menu Select key (D).
5.6.2 Setting the low battery alarm threshold
Use this setting to determine the battery power level that triggers the low battery alarm.
1. To enter the beltpack menu, press and hold the Menu key (D).
2. Use the rotary and Menu Select keys to select Settings > Alarm Options > Low Battery
Threshold.
Page 41
To Next Page
Loading...
Need help?
General
