User Guide| FreeSpeak II for Eclipse HX
5.15 Performing a site survey
Note: You can only access this option if you have advanced menu access.
You can survey an intercom installation to determine how may FreeSpeak II transceivers are
present. You can do this in two ways:
l Connecting to a system and detecting all FreeSpeak II transceivers connected to that
system
l Performing a survey with no system connection. All FreeSpeak II transceivers are detected
regardless of which system they are connected to.
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Site Survey.
Page 48
To Next Page
Loading...
Need help?
General
