Specification Value
Beltpack Frequency Response 100 Hz to 7.1 kHz
Beltpack Assignment-Select
Buttons
2, used to edit beltpack menu options
Number of sumultaneous Full-
Duplex Audio Paths
Up to 7 including Reply Key and two PTT keys. Only four
with individual level control.
Level/Talk Controls 2 top-mounted rotary encoders
Headset Connector XLR-4M, Clear-Com standard
Headphone Impedance ≥32 ohm
Microphone Type Dynamic or electret, selectable in beltpack menu
Input Level 70 to -40 dBu
Electret headphone voltage 2.3V
Microphone and Headset Limiters Selectable in beltpack menu
Powering Li-Ion Battery, 3 AA alkaline cells
Latency for E1
Latency for AES67
Battery Charging In unit, via 5-way AC60 charger
Battery Life Approximately 18 hours
Range from Single FSII-TCVR-19
Transceiver
500 m from transceiver in line-of-sight conditions; 50 m
indoors;
use multiple transceivers for larger, custom coverage
areas
Approx. dimensions 38 x 130 x 100 mm (dwh) (1.5 x 5 x 3.75 inches)
Weight (with batteries) Approx. 400g (9 oz)
To Next Page
Loading...
