User Guide| FreeSpeak II for Eclipse HX
software (EHX).
You can register the beltpacks using a USB cable or over the air (OTA).
To register FreeSpeak beltpacks with the system see the Eclipse HX Software Configuration User
Guide, 5.59 FreeSpeak II Beltpacks.
7.11 Upgrading FS II Transceiver firmware
You can upgrade the transceiver firmware by:
l Using a USB connection
l Using a wireless connection.
7.12 Upgrading by USB connection
1. Connect the transceiver to a USB port on the computer running the EHX software.
2. Select Tools > Apply Wireless Firmware Via USB.
3. Browse to the location of the upgrade file, and then select Update Firmware.
The upgrade file is downloaded to the transceiver.
Note: You can connect more than one transceiver to the computer if you have multiple USB ports. The
units will be upgraded sequentially.
7.13 Upgrading by wireless connection
1. Right-click on the Frame in the Layout window, and then select Firmware > Update
Firmware. The Update Firmware Wizard appears.
2. Select Next. The following screen appears:
Page 86
To Next Page
Loading...
Need help?
General
