User Guide| FreeSpeak II for Eclipse HX
l If the IPT is using both local and PoE, if you remove the local power supply connection, the
IPT power supply is interrupted for 1 to 2 seconds and then continues using the PoE supply.
l If the IPT is using both local and PoE, if you remove the PoE connection, the IPT continues
to operate without interruption using the local power supply.
6.12 Upgrading the FS II IP Transceiver firmware
You can upgrade the transceiver firmware by:
l Upgrading from the matrix (the file extension for the upgrade firmware is .fww)
l Using a USB connection (the file extension for the upgrade firmware is .fws)
6.13 Upgrading from the matrix
1. Right-click on the Frame in the Layout window, and then select Firmware > Update
Firmware. The Update Firmware Wizard appears.
2. Select Next. The following screen appears:
Note: For IPT Transcievers, the Auto/Promoted radio button is always set to Auto.
3. Select the Wireless radio button.
4. Select Next, and then browse to the upgrade file (.tar.gz) and select Open. The upgrade file is
loaded to the transceiver, and the transceiver restarts.
You can track the status of the download in the EHX Event Log.
Page 66
To Next Page
Loading...
Need help?
General
