Clear-Com FreeSpeak II FSII-TCVR-24 User Manual

User Guide| FreeSpeak II for Eclipse HX
3. Use either rotary control to select a value between 0 and 100%.
4. To confirm the selection and exit the menu screen, press the Menu Select key (D).
5.6.3 Setting the out of range alarm
Use this setting to determine what kind of alarm the beltpack issues when it moves out or range of
a transceiver. You can set the following alarms:
l Audio on
l Off
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Alarm Options > Out of Range
Alarm.
3. Use either rotary control to select between:
n Audio only
n Off
4. To confirm the selection and exit the menu screen, press the Menu Select key (D).
5.6.4 Setting the call alert
Use this setting to determine what kind of alert the beltpack issues when it receives an incoming
call. You can set the following alerts:
l Audio warning
l Vibrate
l Audio warning and vibrate
l Off
1. To enter the beltpack menu, press and hold the Menu key.
2. Use the rotary and Menu Select keys to select Settings > Alarm Options > Call Alert Mode.
3. Use either rotary control to select between:
n Vibrate & Audio (default)
n Vibrate Only
n Audio Only
n Off
4. To confirm the selection and exit the menu screen, press the Menu Select key (D).
Page 42

Clear-Com FreeSpeak II FSII-TCVR-24 Specifications

General

Brand	Clear-Com
Model	FreeSpeak II FSII-TCVR-24
Category	Intercom System
Language	English