CleaverBrooks CFC - Page 100

CB FALCON HYDRONIC CONTROL
750-265 2
• Digital Outputs
• Pump Control (3 outputs, 5 different
programmable features)
• Combustion Blower
• External Ignition
• Pilot Valve
•Main Valve
•Alarm
• Analog Outputs
• Modulation
•4-20mA
•0-10 Vdc
• PWM for Variable Frequency Drives
• Algorithm Prioritization
• Burner Demand
• CH, DHW and Frost Protection
• Firing Rate Limiting
• Anti-Condensate, Stack Limit, Boiler
Delta-T, Boiler Slow Start, Outlet Limit,
On and Off Hysteresis
• Two Temperature Loops of Control
•CH
• DHW
• High Limit Control (Meets UL 353)
• Fifteen Item Fault Code History including equipment
status at time of lockout
• Fifteen Item Alert Code Status including equipment
status at time of internal alerts
• 24Vac Device Power
• 24 or 120Vac Digital I/O models available.
• Flame Signal test jacks (Vdc)
• Three Status LEDs
•Power
•Flame
•Alarm
• Analog NTC Sensor Inputs (10kohm or 12kohm)
NOTE: 12kohm sensors cannot be used for Limit
Application functions.
• Flame Sensing
• Ultraviolet
•Flame Rod
• Single Element (Internal spark generator
and flame sense using the same
element)
• Dual Element (separate elements for
ignition spark and flame sense)