3 750-265
TABLE OF CONTENTS
Application ......................................................................................................................................................... 1
Features ............................................................................................................................................................. 1
Overview ............................................................................................................................................................ 7
Installation .......................................................................................................................................................... 9
Wiring ................................................................................................................................................................. 9
Startup ................................................................................................................................................................ 16
Parameter Control Blocks (PCB) ....................................................................................................................... 16
Programming Safety Parameters ....................................................................................................................... 17
Annunciator ........................................................................................................................................................ 48
Fault Handling .................................................................................................................................................... 51
Lockouts and Alerts .................................................................................................................................... 51
Alarms for Alerts ......................................................................................................................................... 51
Sensor Signal Conditioning ........................................................................................................................ 51
Burner Control Operation ................................................................................................................................... 52
Safety Shutdown of Burner Control Functions ............................................................................................ 52
Standby Hold .............................................................................................................................................. 52
Operational Sequence ................................................................................................................................ 52
Parameter Glossary ....................................................................................................................... 54
Global Modbus .................................................................................................................................... 68
Fault Code and Troubleshooting. ...............................................................................................
........................ 99
This Product Data sheet is intended to provide a general
overview of the CB Falcon controller.The interaction of all of the
device’s parameters makes definitively describing the actual
control operation impossible.
This document is a textbook version of the parameters. The
glossary beginning on page 54 provides an abbreviated
parameter explanation along with a reference page for a more
in-depth explanation.
The actual setup of the controller is accomplished using the
833-3577 System Operator Interface or the DSP3944 Setup
Tool. This document will assist in understanding the
parameters being set up.
Included is a worksheet example (p. 63) of the device’s
parameters and how they might be set up to provide a
functioning system.
Note that this sheet (like the CB Falcon System Operator
Interface) shows all parameters. The actual product may have
parameters made invisible or read-only by the OEM, as they
may not apply for their product.