SNMP support
6-46 Chapter 6: Configuration 98-148248-C
6.7 SNMP support
The SAILOR 600 VSAT Ka supports SNMP v2 requests to retrieve configuration and present
settings. SNMP is always enabled on all Ethernet interfaces. The SNMP community string is
public.
The SAILOR 600 VSAT Ka offers via SNMP most of the data that are available from the
DASHBOARD web pages. Detailed documentation about supported OIDs can be found in
the SAILOR 600 VSAT Ka MIB file. This file can be downloaded from the web interface.
The MIB entries are grouped in the following sections:
•System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
To get the MIB file, do as follows:
1. Select HELPDESK.
2. Click the link Download MIB file.
3. Save the file on your computer.
None of the SNMP values need to be polled more often than once a minute.
Polling SNMP values more frequently will impact the performance of the ACU.
Figure 6-35: Download of MIB file
To Next Page
Loading...
Need help?
General