98-148248-C D-1
Appendix D
DDDD
System messages D
This appendix has the following sections:
• Event messages – overview
• List of ADU events
• List of ACU events
D.1 Event messages – overview
The SAILOR 600 VSAT Ka detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• PAST (Person Activated Self test) – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the SAILOR 600 VSAT Ka detects an event that requires your action, it issues an
event message and the red Fail/Pass LED in the LED panel of the ACU is lit. As long as an
event is active, it is shown in the ACU display, the Control Panel and the web interface (in
HELPDESK > Event list or click the event icon on the DASHBOARD).
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005). This is
supplemental information and used for service and diagnostics purposes.
Note that the following sections cover the system messages for all SAILOR VSAT antennas.
Some of the events may not be relevant for the antenna described in this manual.
Active events and notifications are shown. As soon as the
event is cleared, it is not displayed any longer. It is then moved
to the Notifications section. Notifications are cleared after 24
hours.
To Next Page
Loading...
Need help?
General